• banner1
  • page_banner2

High Temperature Molybdenum Heating Elements for Vacuum Furnace

Short Description:

Molybdenum is refractory metal and is ideally suited for use at high temperatures. With their special properties, molybdenum is the perfect choice for components in the furnace construction industry. Molybdenum heating elements (molybdenum heater) are mostly used for high-temperature furnaces, sapphire growth furnaces, and other high-temperature furnaces.


Product Detail

Product Tags

Description

Molybdenum is refractory metal and is ideally suited for use at high temperatures. With their special properties, molybdenum is the perfect choice for components in the furnace construction industry. Molybdenum heating elements (molybdenum heater) are mostly used for high-temperature furnaces, sapphire growth furnaces, and other high-temperature furnaces.

Type and Size

Molybdenum heating elements can be welded and sliced. Molybdenum heating elements should be made of one continuous piece of wire, rod, or ribbon. Standard availability is described below. Other sizes and tolerances are available.

Diameter (mm)

Width (mm)

Height (mm)

Size

Tolerance

Size

Tolerance

Size

Tolerance

3

±0.1

<650

±5.0

<1200

±10.0

4

±0.1

<600

±5.0

<1150

±10.0

5

±0.1

<550

±5.0

<1100

±10.0

6

±0.2

<550

±5.0

<1050

±10.0

7

±0.2

<500

±5.0

<1000

±10.0

8

±0.2

<500

±5.0

<950

±5.0

9

±0.2

<450

±5.0

<900

±5.0

Features

  • High operating temperatures
  • Outstanding creep resistance
  • High level of dimensional stability
  • Extremely pure
  • Excellent corrosion resistance
  • Low coefficient of expansion

Applications

Molybdenum heating elements can be expected, under proper conditions, to maintain temperatures up to approximately 1800°C. These are widely applied in high-temperature resistance furnaces, sapphire growth furnaces.

Craftsmanship

Raw Material:  Starting from raw materials, we select high-quality raw materials, which is very prominent in the stability and consistency of products. Identify different brands of raw materials and mark the batch number. And each batch of raw materials shall be sampled, inspected and archived. Ensure the traceability of each finished product and continuously improve the product quality.

Powder: The control of the milling process of Zhaolinxin Metal products is very accurate, with several large mixers and vibration platforms to ensure that the materials in the pulverizing and mixing process can be fully stirred and evenly distributed, so as to ensure the internal organization consistency of the products.

Pressing: In the process of powder compacting, the powder is pressed by isostatic pressing equipment to make its internal structure uniform and dense. Zhaolixin has very perfect batch mold, and also has isostatic pressing equipment to meet the production of ultra-large batches of products.

Sintering: In powder metallurgy, after the metal powder is formed by isostatic pressing, it is heated at a temperature lower than the melting point of the main components to make the particles connect, so as to improve the performance of the products, which is called sintering. After the powder is formed, the dense body obtained by sintering is a kind of polycrystalline material. The sintering process directly affects the grain size, pore size and grain boundary shape and distribution in the microstructure, which is the core process of powder metallurgy.

Forging: The forging process can make the material obtain higher density, better mechanical properties, and play a role in strengthening the surface. Accurate control of the processing rate and forging temperature of tungsten and molybdenum materials is an important factor for the superior performance of Zhaolixin tungsten and molybdenum materials. A processing method of using a forging machine to apply pressure to a metal blank to plastically deform it to obtain a forging with certain mechanical properties, certain shape and size.

Rolling: The rolling process makes the metal material produce continuous plastic deformation under the pressure of the rotating roll, and obtain the required section shape and properties. With advanced tungsten and molybdenum cold and hot rolling technology and equipment, from tungsten and molybdenum metal blank to the production of tungsten and molybdenum foil, Zhaolixinguarantees you more advanced production technology and superior metal properties.

Heat-Treat: After the forging and rolling process, the material is subjected to the heat treatment process to completely eliminate the internal structural stress of the material, give play to the material performance, and make the material easier for subsequent machining. Zhaolixin has dozens of vacuum furnaces and heat treatment hydrogen furnaces to meet the rapid delivery of mass production orders.

Machining: The material of Zhaolixin has undergone complete heat treatment, and then processed into various customized sizes by machining equipment such as turning, milling, cutting, grinding, etc., and ensures that the internal organization of tungsten and molybdenum materials is tight, stress-free and hole-free, which can meet the needs of customers.

Quality Assurance: Quality inspection and control will be carried out from raw materialsand for each steps of the production , so as to continuously ensure the quality every product. At the same time, when finished products are delivered from the warehouse, the appearance, size and internal organization of materials are tested one by one. Therefore, the stability and consistency of products are especially prominent.

weq

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Molybdenum Fasteners,Molybdenum Screws, Molybdenum Nuts and threaded rod

      Molybdenum Fasteners,Molybdenum Screws, Molybd...

      Description Pure Molybdenum fasteners have excellent heat resistance, with a melting point of 2,623 ℃. It is useful for heat resistant devices such as sputtering equipment and high-temperature furnaces. Available in sizes M3-M10. Type and Size We have a large number of precision CNC lathes, machining centers, wire-electrode cutting devices and other facilities. We can manufacture scr...

    • Pure Molybdenum Thermal Spray Wire for Galling and Scuffing Resistance

      Pure Molybdenum Thermal Spray Wire for Galling ...

      Type and Size Zhaolixin Tungtsen & Molybdenum can supply molybdenum wire according to your drawings and demands. Diameter (μm) Weight (mg/200mm) Weight (mg/200mg) Tolerance (%) Diameter Tolerance (%) Grade 1 Grade 2 Grade 1 Grade 2 20≤d<30 0.65~1.47 ±2.5 ±3 30≤d<40 >1.47~2.61 ±2.0 ±3 40≤d<100 >2.61~16.33 ±1.5 ±3 100≤d<400 >16.33~256.2 ±1.5 ±4 400≤d...

    • Vacuum coating molybdenum boats

      Vacuum coating molybdenum boats

      Description Molybdenum boats are formed by processing high-quality molybdenum sheets. The plates have good thickness uniformity, and can resist to deformation and are easy to bend after vacuum annealing. Type and Size 1.Type of vacuum thermal evaporator Boat 2.Dimensions of molybdenum boat  Name Symbol of products Size(mm) Troug...

    • Molybdenum Hammer Rods For Single Crystal Furnace

      Molybdenum Hammer Rods For Single Crystal Furnace

      Type and Size Item surface diameter/mm length/mm purity density(g/cm³) producing methord Dia tolerance L tolerance molybdenum rod grind ≥3-25 ±0.05 <5000 ±2 ≥99.95% ≥10.1 swaging >25-150 ±0.1-0.2 <2000 ±2 ≥10 forging >150 ±0.5 <800 ±2 ≥9.8 sintering black ≥3-25 ±2 <5000 ±2 ≥10.1 swaging >25-150 ±3 <2000 ±2 ≥10 forging >150 ±5 <800 ...

    • High Purity 99.95% Molybdenum Cups Stamping Molybdenum Cups

      High Purity 99.95% Molybdenum Cups Stamping Mol...

      Description Stamping Cups &Disc for PDC&PCBN cutter Cups &Discs are used in polycrystalline diamond compact bit. (PDC) Size of Cups &Disc according to your requirement. Cups can be offered with molybdenum, ziconium, tantalum, niobium,titanium, cobalt material. Cup Forms include cambered cups, conical cups, convex spherical cup, cuneate cup, trapezoid cup, etc. Cup can be offered with different sizes. Popular size as follows, 0808 1004 1008 ...

    • Thin Molybdenum Strip Wear Resistance

      Thin Molybdenum Strip Wear Resistance

      Specifications The thickness of our molybdenum strip can be as thin as 0.15mm.The purity of our molybdenum strip can reach 99.95%, and the density can reach or close to the theoretical density.The quality of our molybdenum strip complies with the American standard ASTM-B760-2007. Molybdenum tape is packed in wooden boxes, which are wrapped with moisture-proof paper and filled with foam between the goods and the box. At the same time, desiccant is placed to...

    //